Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors

UL Standard Edition 9 Published Date: December 15, 2008 Last Revision: September 24, 2021 ANSI Approved: September 24, 2021 DOD Approved: October 24, 1984

Scope

00014b-000000-000000

1 Scope

1.1 These requirements apply to hardware for horizontally sliding fire doors which have demonstrated in fire tests fire-resistive properties warranting their use with two-ply and three-ply tin-clad fire doors tested in accordance with the Standard for Fire Tests of Door Assemblies, UL 10B (NFPA No. 252).

1.2 Requirements for the location and time rating are contained in codes, such as the International Building Code (IBC). The method of installation required for fire doors is not included in these codes. Requirements for the details for the installation of horizontally sliding two-ply and three-ply tin-clad fire doors are included in the Standard for Fire Doors and Other Opening Protectives, NFPA 80.

1.3 The hardware included in these requirements is designed for mounting standard two-ply and three-ply tin-clad horizontally sliding fire doors for protection of openings not exceeding the dimensions for the hourly classifications indicated in .

1.4 These requirements do not cover automatic releasing or closing mechanisms.

Table 1.1 Limitations in types and dimensions

Type of door

Maximum area,

Maximum width,

Maximum height,

Hourly rating

ft²

(m)²

(m)

Three-ply

120

11.2

3.6

3, 1-1/2, 1, 3/4

Two-ply

7.4

3.1

1-1/2, 1, 3/4

Summary of Topics

Summary of Topics s14B_9_sum.html

SUMMARY OF TOPICS

This revision of ANSI/UL 14B dated September 24, 2021 is being issued to update the title page to reflect the most recent designation as a Reaffirmed American National Standard (ANS). No technical changes have been made.

$505.00-$1,258.00

Purchase Options Get Update Alerts

About

Digital View

About

Date
September 24, 2021	Redline	Revision
July 17, 2017		Revision
May 03, 2013		Revision

Date

September 24, 2021

Redline

Revision

July 17, 2017

Revision

May 03, 2013

Revision

CSDS Proposal CSDS Proposals An electronic document associated with a UL Standard for Safety or Outline of Investigation, and issued by UL to propose: A revision of a single or multiple requirement(s). A complete new edition of an existing Standard or Outline. A new Standard or Outline that has not previously been published. CSDS Proposals provide access to view the proposal and submit comments within UL's Collaborative Standards Development System (CSDS) appropriately. ×
August 06, 2021
May 26, 2017
March 08, 2013

CSDS Proposal

CSDS Proposals

An electronic document associated with a UL Standard for Safety or Outline of Investigation, and issued by UL to propose:

A revision of a single or multiple requirement(s).
A complete new edition of an existing Standard or Outline.
A new Standard or Outline that has not previously been published.

CSDS Proposals provide access to view the proposal and submit comments within UL's Collaborative Standards Development System (CSDS) appropriately.

August 06, 2021

May 26, 2017

March 08, 2013

Showing 10 of XX

Show All Show Less

Bulletin Bulletins These bulletins are not used in CSDS. These are announcement and report type bulletins. ×	Summary of Topics (SOT)
April 08, 2016	View Summary of Topics m0009_8_20160408_sum.html Subject 9 (10A, 10B, 10C, 10D, 14B, 14C) Bulletin Dated: April 8, 2016 SUMMARY OF TOPICS The following topics were discussed at the meeting of the Standards Technical Panel for Fire Doors, STP 10: 1. Neutral Pressure Plane 2. Fire Tests for Fire Protective Curtains 3. Percentage of Oxygen in the Furnace Chamber 4. Unexposed Surface Temperature 5. New Standard for the Interpretation of Test Data 6. Small Scale Fire Testing for Non-structural Applications 7. Clarification of Section 5 (Special Features) in UL 10D 8. Testing of Horizontal Closures 9. Status of New UL 10C Proposals
March 30, 2015	View Summary of Topics m0010c_2_20150330_sum.html Subject 10 (9, 10A, 10B, 10C, 14B, 14C) Bulletin Dated: March 30, 2015 SUMMARY OF TOPICS The following topics were discussed at the meeting of the Standards Technical Panel for Fire Doors, STP 10: 1. Review the Revisions from the Last Ballot Cycle 2. Discussion of New Proposal Regarding Neutral Pressure Plane Requirements
November 01, 2012	View Summary of Topics m0010b_10_20121101_sum.html Subject 10 (9, 10A, 10B, 10C, 14B, 14C) Bulletin Dated: November 1, 2012 SUMMARY OF TOPICS The following topics were discussed at the meeting of the Standards Technical Panel for Fire Doors, STP 10: 1. Recent Fire Door Activity Discussion 2. Fire Door Test Specimen Size(s) 3. Temperature Rise Criteria 4. Upcoming STP Submittals 5. Need for Future Meetings 6. UL 10D Status
June 15, 2012	View Summary of Topics m0010b_10_20120615_sum.html Subject 10 (9, 10A, 10B, 10C, 14B, 14C) Bulletin Dated: June 15, 2012 SUMMARY OF TOPICS The following topics were discussed at the meeting of the Standards Technical Panel for Fire Doors, STP 10: 1. Discuss Testing Apparatus 2. Discuss Temperature Rise Rating Criteria 3. Update 3 Hour Astragal Allowance 4. Time Duration After Fire Endurance Test and Before Hose Stream Test 5. Formalize UL Subject 63, Outline of Investigation for Fire Door Frames, into a Formal ANSI Standard Under the Purview of STP 10 6. Addition of Test Method Introduction on Small Scale Fire Test 7. UL 10B - Time of Testing - Masonry 8. Evaluation Program for Oversized Rolling Steel Doors 9. Validate Section 7.5 of UL 10C - Oxygen Requirement
June 12, 2009	View Summary of Topics m0010d_1_20090612_sum.html Subject 10D (9, 10A, 10B, 10C, 14B, 14C) Bulletin Dated: June 12, 2009 Summary of Topics This bulletin announces the availability of the Outline of Investigation for Fire Tests for Fire Protective Curtains, Subject 10D.

Bulletin

Bulletins

These bulletins are not used in CSDS. These are announcement and report type bulletins.

Summary of Topics (SOT)

April 08, 2016

View

Summary of Topics m0009_8_20160408_sum.html

Subject 9 (10A, 10B, 10C, 10D, 14B, 14C)

Bulletin Dated: April 8, 2016

SUMMARY OF TOPICS

The following topics were discussed at the meeting of the Standards Technical Panel for Fire Doors, STP 10:

1. Neutral Pressure Plane

2. Fire Tests for Fire Protective Curtains

3. Percentage of Oxygen in the Furnace Chamber

4. Unexposed Surface Temperature

5. New Standard for the Interpretation of Test Data

6. Small Scale Fire Testing for Non-structural Applications

7. Clarification of Section 5 (Special Features) in UL 10D

8. Testing of Horizontal Closures

9. Status of New UL 10C Proposals

March 30, 2015

View

Summary of Topics m0010c_2_20150330_sum.html

Subject 10 (9, 10A, 10B, 10C, 14B, 14C)

Bulletin Dated: March 30, 2015

SUMMARY OF TOPICS

The following topics were discussed at the meeting of the Standards Technical Panel for Fire Doors, STP 10:

1. Review the Revisions from the Last Ballot Cycle

2. Discussion of New Proposal Regarding Neutral Pressure Plane Requirements

November 01, 2012

View

Summary of Topics m0010b_10_20121101_sum.html

Subject 10 (9, 10A, 10B, 10C, 14B, 14C)

Bulletin Dated: November 1, 2012

SUMMARY OF TOPICS

The following topics were discussed at the meeting of the Standards Technical Panel for Fire Doors, STP 10:

1. Recent Fire Door Activity Discussion

2. Fire Door Test Specimen Size(s)

3. Temperature Rise Criteria

4. Upcoming STP Submittals

5. Need for Future Meetings

6. UL 10D Status

June 15, 2012

View

Summary of Topics m0010b_10_20120615_sum.html

Subject 10 (9, 10A, 10B, 10C, 14B, 14C)

Bulletin Dated: June 15, 2012

SUMMARY OF TOPICS

The following topics were discussed at the meeting of the Standards Technical Panel for Fire Doors, STP 10:

1. Discuss Testing Apparatus

2. Discuss Temperature Rise Rating Criteria

3. Update 3 Hour Astragal Allowance

4. Time Duration After Fire Endurance Test and Before Hose Stream Test

5. Formalize UL Subject 63, Outline of Investigation for Fire Door Frames, into a Formal ANSI Standard Under the Purview of STP 10

6. Addition of Test Method Introduction on Small Scale Fire Test

7. UL 10B - Time of Testing - Masonry

8. Evaluation Program for Oversized Rolling Steel Doors

9. Validate Section 7.5 of UL 10C - Oxygen Requirement

June 12, 2009

View

Summary of Topics m0010d_1_20090612_sum.html

Subject 10D (9, 10A, 10B, 10C, 14B, 14C)

Bulletin Dated: June 12, 2009

Summary of Topics

This bulletin announces the availability of the Outline of Investigation for Fire Tests for Fire Protective Curtains, Subject 10D.

Showing 10 of XX

Show All Show Less

Showing 10 of XX

Show All Show Less

Showing 10 of XX

Show All Show Less

Showing 10 of XX

Show All Show Less

Showing 10 of XX

Show All Show Less

Standard	Edition	Title
10B	10	Standard for Fire Tests of Door Assemblies

Standard

Edition

Title

10B

Standard for Fire Tests of Door Assemblies

Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors

$505.00-$1,258.00

Revisions and Related Documents

Below is a list of UL Standards referenced in UL 14B

Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors

1 Scope

SUMMARY OF TOPICS

$505.00-$1,258.00

Revisions and Related Documents

Subject 9 (10A, 10B, 10C, 10D, 14B, 14C)

Bulletin Dated: April 8, 2016

SUMMARY OF TOPICS

Subject 10 (9, 10A, 10B, 10C, 14B, 14C)

Bulletin Dated: March 30, 2015

SUMMARY OF TOPICS

Subject 10 (9, 10A, 10B, 10C, 14B, 14C)

Bulletin Dated: November 1, 2012

SUMMARY OF TOPICS

Subject 10 (9, 10A, 10B, 10C, 14B, 14C)

Bulletin Dated: June 15, 2012

SUMMARY OF TOPICS

Subject 10D (9, 10A, 10B, 10C, 14B, 14C)

Bulletin Dated: June 12, 2009

Summary of Topics

Below is a list of UL Standards referenced in UL 14B

You have one or more subscriptions that will expire soon.

You have one or more licenses to assign

Additional information required

Featured Standards

Recently Published

Coming Soon

Email Verification Required